Beginner's guide
Reading Moulds: Understanding Mould Differences Before You Rent
18 November 2026

When you start getting interested in amulets, one word you hear constantly is "phim" (mould), as in large mould, small mould or stupa mould. Reading moulds is a basic skill, because it tells you what the amulet in front of you should look like. This article explains what a mould is and how to practise telling moulds apart systematically.
What is a mould?
"Phim" or "phim song" refers to the form produced by the mould used to make an amulet. Amulets pressed or stamped from the same mould share the same shape, proportions and main details, while those from different moulds differ, for example in the size of the figure, the shape of the arch, the number of base tiers or the form of the topknot. Collectors name moulds after these distinctive features so they are easy to refer to and remember.
An example from Phra Somdej
Phra Somdej Wat Rakhang is a good example of an amulet with several moulds. Collectors divide it into main moulds such as the large mould (phim yai), the stupa mould (phim song chedi), the lotus-bud topknot mould (phim ket bua tum), the "than saem" mould with extra base lines, and the "prok pho" mould with bodhi leaves. Each differs in the shape of the figure, the topknot and the number or form of the base tiers. Students first memorise these differences and then study the details within each mould. It shows that amulets with the same name can look very different.
Main moulds and sub-moulds
Within one main mould there may be sub-moulds, because there could be several moulds or a new mould was carved during production, creating small differences such as the arch line, the position of the ears or the thickness of the arms. For stamped coins, this kind of difference is called a "block" (die). Beginners do not need to memorise every sub-mould at once, but should know they exist, so as not to conclude too quickly that a piece slightly different from a reference photo is fake, or the other way round.
How to practise
Start by choosing just one or two amulet types you like, then find images of widely accepted reference pieces from books or reliable sources. Look at the overall picture first, such as the proportion of the figure to the frame, then go through the details from top to bottom: topknot, face, shoulders, arms, lap and base. Note down what you observe at each point. Repeating this will help you remember moulds systematically rather than by feel.
Another effective technique is to place photos of two amulets side by side at the same size and compare them point by point, or to sketch the outline of a mould by hand in your notebook. Drawing forces you to look deliberately at proportions and lines. After a while you will begin to see which points are key for telling moulds apart, and which are only variations from pressing or wear over time.
A correct mould does not mean genuine
The most important thing to remember is that a correct mould is only the first gate. Imitations made by casting from genuine pieces can have very similar moulds, so you must always look at the material, surface, age and traces of production as well. If unsure, seek an opinion from an expert or reputable institution, check the seller, and do not decide just because the mould looks like the picture in a book.